Draytek 2910 - Manual (Page 145)

Vigor2910 Series User’s Guide 139
invoke this function; click off to close the function.
Default SIP Account You can set SIP accounts (up to six groups) on SIP Account
page. Use the drop down list to choose one of the profile
names for the accounts as the default one for this phone
setting.
Play dial tone only when
account registered Check this box to invoke the function.
FXO Feature Enable ISDN to VoIP (On-Net) Calls – Check this box to
make all the outgoing calls from ISDN line to be forwarded to
receivers by Internet.
Enable VoIP to ISDN (Off-Net) Calls –Check this box to
make all the incoming calls coming from Internet to be
forwarded to receivers by ISDN line.
In addition, you can press the Advanced button to configure tone settings, volume gain,
MISC and DTMF mode. Advanced setting is provided for fitting the telecommunication
custom for the local area of the router installed. Wrong tone settings might cause
inconvenience for users. To set the sound pattern of the phone set, simply choose a proper
region to let the system find out the preset tone settings and caller ID type automatically. Or
you can adjust tone settings manually if you choose User Defined. TOn1, TOff1, TOn2 and
TOff2 mean the cadence of the tone pattern. TOn1 and TOn2 represent sound-on; TOff1 and
TOff2 represent the sound-off.
Region Select the proper region which you are located. The common
settings of Caller ID Type, Dial tone, Ringing tone, Busy
tone and Congestion tone will be shown automatically on the
page. If you cannot find out a suitable one, please choose