Draytek 2910 User Manual
Vigor2910 dual-wan security router user’s guide
Vigor2910
Dual-WAN Security Router
User’s Guide
Version: 3.2
Date: 2007/10/01
Copyright 2007 All rights reserved.
This publication contains information that is protected by copyright. No part may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright
holders. The scope of delivery and other details are subject to change without prior notice.
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer are trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Computer Inc.
Other products may be trademarks or registered trademarks of their respective manufacturers.
Document Outline
- Table of Contents
- 1. Preface
- 2. Configuring Basic Settings
- 3. Advanced Web Configuration
- 4. Application and Examples
- 4.1 Create a LAN-to-LAN Connection Between Remote Office
- 4.2 Create a Remote Dial-in User Connection Between the
- 4.3 QoS Setting Example
- 4.4 LAN – Created by Using NAT
- 4.5 Calling Scenario for VoIP function
- 4.6 Upgrade Firmware for Your Router
- 4.7 Request a certificate from a CA server on Windows CA
- 4.8 Request a CA Certificate and Set as Trusted on Windows
- 4.9 VPN TRUNK Application
- 4.10 ERD Mechanism for VPN TRUNK
- 5. Trouble Shooting
- 5.1 Checking If the Hardware Status Is OK or Not
- 5.2 Checking If the Network Connection Settings on Your
- 5.3 Pinging the Router from Your Computer
- 5.4 Checking If the ISP Settings are OK or Not
- 5.5 Problems for 3G Network Connection
- 5.6 Backing to Factory Default Setting If Necessary
- 5.7 Contacting Your Dealer