Draytek 2910 User Manual
Page 152
Vigor2910 Series User’s Guide
146
As depicted in the above application scenario, the Virtual TA client can make an outgoing
call or accept an incoming call to/from a peer FAX machine or ISDN TA, etc.
Before describing the configuration of Virtual TA in the Vigor routers, please heed the
following limitations.
z
The Virtual TA client only supports Microsoft
TM
Windows 98/SE/2000/XP platforms.
z
The Virtual TA client only supports the CAPI 2.0 protocol and has no built-in FAX
engine.
z
One ISDN BRI interface has two B channels. The maximum number of active clients is
also 2.
z
Before you configure the Virtual TA, you must set the correct country code in ISDN
Setup.
Virtual TA Server
Enable: Select it to activate the server.
Disable: Select it to deactivate the server. All Virtual TA
applications will be terminated.
Virtual TA User Profiles
Username - Enter the username of a specific client.
Password - Enter the password of a specific client.
MSN 1/2/3 - MSN stands for Multiple Subscriber Number. It
means you can apply to more than one ISDN lines number over
a single subscribed line. Note that the service must be acquired
from your telecom. Specify the MSN numbers for a specific
client. If you have no MSN services, leave this field blank.
Active - Check it to enable the client to access the server.