Draytek 2910 - Manual (Page 121)

Vigor2910 Series User’s Guide 115
field) ”x” means such profile is disabled.
Name (on Backup Profile
field) Display the name of VPN TRUNK profile.
Member1 (on Backup
Profile field) Display the dial-out profile selected from the Member1 drop
down list below.
Active (on Backup Profile
field) “Yes” means normal condition.
”No” means the state might be disabled or that profile
currently is set with Dial-in mode (for call direction) in
LAN-to-LAN.
Type (on Backup Profile
field) Display the connection type for that profile, such as IPSec,
PPTP, L2TP, L2TP over IPSec (NICE), L2TP over
IPSec(MUST) and so on.
Member2 (on Backup
Profile field) Display the dial-out profile selected from the Member2 drop
down list below.
Status After choosing one of the profile listed above, please click
Enable to activate this profile. If you click Disable, the
selected VPN TRUNK profile will not have any effect for
VPN tunnel.
Profile Name Type a name for VPN TRUNK profile. Each profile can group
two VPN connections set in LAN-to-LAN. The saved VPN
profiles in LAN-to-LAN will be shown on Member1 and
Member2 fields.
Member 1/Member2 Display the selection for LAN-to-LAN dial-out profiles
(configured in VPN and Remote Access >> LAN-to-LAN)
for you to choose for grouping under certain VPN backup
profile.
No - Index number of LAN-to-LAN dial-out profile.
Name - Profile name of AN-to-LAN dial-out profile.
Connection Type - Connection type of AN-to-LAN dial-out
profile.
VPN ServerIP (Private Network) - VPN Server IP of
LAN-to-LAN dial-out profiles.
Attribute Mode Display available mode for you to choose. At present, only
backup function is provided by this system. It is not necessary
for you to choose attribute mode for your router.
Add Add and save new profile to the backup profile list. The
corresponding members (LAN-to-LAN profiles) grouped in
such new VPN TRUNK profile will be locked. The profiles in
LAN-to-LAN will be displayed in red.
Edit Click this button to save the changes to the Status (Enable or
Disable), profile name, member1 or member2.
Delete Click this button to delete the selected VPN TRUNK profile.
The corresponding members (LAN-to-LAN profiles) grouped
in the deleted VPN TRUNK profile will be released and that
profiles in LAN-to-LAN will be displayed in black.