OpenEye OE-C7163 - Manual (Page 30)

31186AE 31
The Setup menu includes System Settings, Picture Setup, and Streaming Settings.
The Setup menu displays limited setup options. For a complete list of setup
options, see the
Advanced section.
Camera Name
Host Name
– The Host Name is used to identify the
camera on your system. If camera based Motion
Detection is enabled and is set to send alarm
message by Mail/FTP, the host name entered here will
display in the alarm message.
Time Zone – Select your time zone.
Time Format
–
Select your desired time format.
Sync With Computer Time
– Select to synchronize
the camera date and time with the connected
recorder.
Sync with NTP Server – Manual allows you to define
the date and time manually. Network Time Protocol
(NTP) is an alternate way to synchronize your
camera
’s clock with a NTP server. Specify the server
you wish to synchronize in the NTP Server box. Then
select an Update Interval . For more information about NTP, visit www.ntp.org.
IP Address
You can choose to use a fixed IP address or a
dynamic IP address (assigned by a DHCP server or
router) for the camera.