Reportstar – OpenEye E-Series Slim User Manual
Page 50
50
ReportStar
To enable ReportStar on your recorder during the initial configuration:
1.
Click
ENABLE REPORTSTAR NOW.
To enable ReportStar at any time after the initial configuration, go to
NETWORK >
REPORTSTAR SETUP
and then set
ENABLE REPORTSTAR
to
ON
.
2.
Log in using the admin user account. (default username:
admin
, password:
1234
)
3.
Set the
CUSTOM DAY/NIGHT TIME
.
4.
Click
SEND
to send a test report to ReportStar.
5.
To send Alarm Events to ReportStar, set
SEND ALARM EVENTS INSTANTLY
to
ON
.
6.
To send active updates to ReportStar every 5 minutes, set
HEARTBEAT
to
ON
.
7.
Click
SAVE
to save your settings.
This manual is related to the following products: