Alarm monitor – OpenEye E-Series Slim User Manual
Page 46
46
Send event information to a remote client using the Alarm Monitor software.
1.
Set
SEND TO ALARM MONITOR
to
ON
.
2.
Select the types of events to send to the Emergency Agent
(
MOTION
,
SENSOR
,
MOTION + SENSOR
).
3.
Type the
IP ADDRESS
of the remote client.
4.
Type the
PORT
number.
The port number selected is the port that Alarm Monitor uses on the remote PC.
The port shown in this screen must match the port shown in Emergency Agent or
RADIUS and the port must be open on the remote PC.
This manual is related to the following products: