OpenEye E-Series Slim - Manual (Page 35)

32705AB 35
Spot / Sequence Setup
Spot/Sequence Setup allows you to set the parameters for the SPOT OUT on the recorder
and the local live view sequencing.
SPOT – Configure the SPOT OUT connection.
INTERVAL
– Set the sequence interval time (
1 ~ 100 seconds).
POPUP – When enabled, this function interrupts the sequencing when an event occurs, and
switches to the event channel ( ON / OFF).
CHANNEL SELECT – Select cameras to include in sequence ( 1~16 , ALL ).
SEQUENCE
– Configure the appearance of the sequence on the live view screen
( VGA/HDMI/MAIN BNC ) .
PAGE DWELL TIME – Set the sequence interval time for full pages ( 0 ~ 100 seconds).