Record, Recording setup, Frame – OpenEye E-Series Slim User Manual
Page 37
32705AB
37
Recording Setup
ON/OFF
– Enable or disable recording on individual camera channels.
SIZE
– Choose the recording resolutions (
352
240 / 704
240 / 704
480 / 960x480
).
IPS
– Choose the recording rate (
1~30
Images Per Second).
QUALITY
– Choose the image quality (
LOW / NORMAL / HIGH / HIGHEST
).
INTENSIVE
– Enable Intensive Recording to be triggered on a sensor or motion event
(
ON/OFF
).
When a motion or sensor event occurs, INTENSIVE RECORDING automatically
increases the recording rate to the maximum IPS that is available (based on your
current recording configuration frame rate) up to 30 IPS per channel. If events
occur on multiple channels with intensive recording enabled, the available IPS is
evenly distributed across those channels.
PRE ALARM
– Set the Pre-Alarm recording time (
0~5
seconds).
POST ALARM
– Set the Post-Alarm recording time (
0~30
seconds).
USED IPS
– This displays the images per second (IPS) currently used, and the total available
IPS.