beautypg.com

ONICON System-40-BAC BTU User Manual

Page 7

background image

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax +1 (727) 442-5699 • [email protected]

System-40-BAC BTU Meter Manual 03/15 - 1045-2

Page

7

1.4 ADDITIONAL REQUIRED HARDWARE

Customer supplied line size threaded tee.
The standard System-40 BTU meter is provided with a single NPT bushing for use with a line size
tee when installing the remote temperature sensor in the pipe opposite the flow sensor pipe.

1.5 WORKING ENVIRONMENT

The SYSTEM-40 was designed for installation and use indoors in residential, commercial and
light industrial environments that are free of corrosive liquids and fumes, temperature extremes
and excess vibration.

The operating ambient air temperature range is -13° F to 131° F. The electrical power should be
relatively clean, free of excess high frequency noise and large voltage transients.

1.6 WARRANTY & SERIAL NUMBER

Warranty

ONICON’s 2-year “No-fault” warranty reduces start-up costs by extending coverage for

incidental damage during installation. Certain exclusions apply. Please refer to ONICON’s

Conditions of Sale for details.

Serial Number

The serial number of your SYSTEM-40 is located on the top of the calculator enclosure. The
serial number is a unique identifier for the product. Please have this number available when
contacting ONICON for assistance.

SECTION 2.0: UNPACKING

The SYSTEM-40 is generally shipped in one package unless optional hardware or equipment is
ordered. Notify the freight carrier and ONICON if any items are damaged in transit.

2.1 CHECKING THAT YOU HAVE RECEIVED EVERYTHING

• The following items have been provided with your SYSTEM-40 BTU Meter:

(2) Line size process connection meter couplings with male NPT threads and sealing
gaskets (shipped attached to meter)
(1) Line size NPT x M10 bushing for remote temperature sensor *
(1) SYSTEM-40 BTU Meter Installation and Operation Guide
(1) SYSTEM-40 BTU Meter Certificate of Calibration

*Optional installation hardware may be provided in place of this fitting

Please notify ONICON if any of these items are missing.