Omnia Audio Omnia A/XE - Manual (Page 46)

defined then the list will be empty. The metadata source will insert stream tags received
from an automation system or another application.
3. Enter the address of the SHOUTcast server and a server password if one is used.
4. Next, enter a stream name that will be advertised on the SHOUTcast server and a
stream genre if desired.
5. When done, click the Save button. The stream will appear in the streams list on the left.
Send to Windows Media server
Windows Media server can accept the stream either in push or pull mode. In push mode
the encoder establishes a connection to the server and sends the stream out. In pull mode
the encoder accepts connections from the server (or other clients). You may choose either or
both delivery methods at the same time.
1. Enter a friendly stream name. You may use letters, numbers and underscores but please
avoid other special characters.
2. If you wish to use the pull mode then click the first Use checkbox. Enter a local port
where the application will accept media requests for this stream. This port number must
not already be in use by A/XE or another application. Next, enter the maximum number
of clients that can request the stream simultaneously. This should be a small number,
perhaps around 5 or 10 or so.
3. If you wish to also push the stream to a Windows Media server click the second Use
checkbox and enter the address of the Windows Media server.
4. When done, click the Save button. The stream will appear in the streams list on the left.
40 | MP3 Encoder