Olson Technology OTOHP-NMS User Guide - Manual (Page 31)

Model OTOHP-NMS User Guide, Rev. X1 www.olsontech.com
31
OTOHP-EDFA Module
This screen displays the status of the OTOHP-EDFA module(s).
Alarm codes are displayed in trap and message form as shown below. The user is not allowed to change any of these
parameters remotely.
Code Description
001 Input Optical Power Low
002 Input Optical Power High
003 Output Optical Power Low
004 Output Optical Power High
005 Pump-1 Drive Current High
006 Pump-2 Drive Current High
007 Pump-1 TEC Current High
008 Pump-2 TEC Current High
009 Pump-1 Temperature High
010 Pump-2 Temperature High
011 Module Temperature High
012 Communication Error
When the value is out the range of meter, double click the meter to change scale. When the window is closed, the system
will save the new scale settings as the default.