Olson Technology OTOHP-NMS User Guide - Manual (Page 30)

Model OTOHP-NMS User Guide, Rev. X1 www.olsontech.com
30
OTOHP-FRX Forward Path Receiver Module
This screen displays the status of the OTOHP-FRX module(s).
Alarm codes are displayed in trap and message form as shown below. Administrator access is required to switch channels or
change the Gain mode.
Code Description
001 Module 1 Input Optical Power Low
002 Module 1 Input Optical Power High
003 Module 2 Input Optical Power Low
004 Module 2 Input Optical Power High
005 Module Temperature High
When the value is out the range of meter, double click the meter to change scale. When the window is closed, the system
will save the new scale settings as the default.