Olson Technology OTOHP-NMS User Guide - Manual (Page 29)

Model OTOHP-NMS User Guide, Rev. X1 www.olsontech.com
29
OTOHP-FTX Forward Path CATV Transmitter Module
This screen displays the status of the OTOHP-FTX module(s).
Alarm codes are displayed in trap and message form as shown below. The user is not allowed to change any of these
parameters remotely.
Code Description
001 Output Optical Power Low (less than 30% of normal)
002 Output Optical Power High (greater than 30% of normal)
003 LD Bias Current High (greater than 100mA)
004 LD Temperature High (greater than 30°C)
005 RF Input Low (less than 7dBm)
006 Module Temperature High (greater than 80°C)
007 TEC Current High (greater than 1A)
008 RF Input High (greater than 7dBm)
When the value is out the range of meter, double click the meter to change scale. When the window is closed, the system
will save the new scale settings as the default.