Olson Technology OTOHP-NMS User Guide User Manual

Page 23

Model OTOHP-NMS User Guide, Rev. X1

www.olsontech.com

Select the IP(s) to add in polling queue. Set the polling interval time. Click “OK” to confirm the operation.

Receive Trap

The program listens to port 162 to receive trap messages. Use the

icon to start the receive trap. (Make sure no other

programs are using port 162.) Use the

icon to stop the receive trap. The

icon can be used to show or hide the

grid. Use the

icon to open the options window. This window allows the user to define message background colors

for different message types; define different message types; setup Email parameters; and setup SMS parameters. The

window below shows how to define message background colors.

The screen shot below shows the screen to define the trap type. (Make sure that there is different ID in the same node.)