Northern Airborne Technology STX100 - Manual (Page 55)

SM67 Rev. 4.10 STX100-000 Globalstar ™ Satphone Transceiver Manual
Section 3 Operation
3.1 Introduction
Information in this section consists of the functional and operational procedures for the
STX100-000 Globalstar
™ Satphone Transceiver.
3.2
Operation Specifics
The STX100-000 Globalstar
TM Satphone Transceiver has no normal user
operational aspects.
All operational functions of the STX100-000 Globalstar
™ Satphone Transceiver are
controlled by the NAT PTA12 POTS Telephone Adapter, and/or a standard 2-wire
aviation handset. Complete information for the PTA12 can be found in the PTA12
Operator’s manual.
Additionally, the STX100-000 can be controlled by the LMC01 Latitude Mobile
Controller, which is used to provide asset management and positioning capability (e.g.,
flight following). The LMC01 is a remote mounted unit, and connects to the data port on
the STX100-000. The LMC01 is optional, and is set-up at time of installation to operate
automatically. Refer to the LMC/LMC01 Users Manual for more information.
If further information is required, please contact the Product Support department at NAT Ltd.
CAUTION:
Any changes or modifications to this equipment not expressly
approved by Northern Airborne Technology Ltd could void the
user's authority to operate the equipment.
End of section 3
Sep 7, 2005 Page 3-1
ENG-FORM: 806-0106.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.