beautypg.com

New wall construction – Dimplex DF2426GB User Manual

Page 8

background image

IMPORTANT: If not using a Dimplex mantel, the fireplace must be

installed in an enclosure with the following

MINIMUM internal/

opening dimensions. (Figure 2)

New Wall Construction

1. Select a suitable location that is not susceptible to moisture and is

away from drapes, furniture and high traffic.
2. Place the fireplace in the desired location to see how it will look in

the room.
3. Mark the desired location on the floor and store the fireplace in a

safe, dry and dust free location.
4. Use studs to frame an opening of 24 1/2 inches (622 mm) wide X

18 1/4 inches (463.6 mm) high X 8 7/8 inches (225.5 mm) deep.

Option #1 - The power cord can be lead from behind the trim and

along the wall to an outlet near the fireplace.

Option #2 - A new outlet can be installed inside the new frame

construction. Plug the unit into a 15Amp/120Volt outlet. If the cord

does not reach, you may use an extension cord rated for a

5

Figure 2

18 1/4”

(463.6 mm)

24 1/2”

(622 mm)

8 7/8”

(225.5 mm)

This manual is related to the following products: