Nevion Multicon - Manual (Page 77)

Protocol Specifications 77
ID: man-multicon Multicon Manual Rev. L
Multicon is using the following commands for southbound interfaces:
Command Name Comments
01 ENABLE_REPORTING
05 XP_REQUEST_LEVEL
10 XP_DIRECT_TAKE
11 FRAME_SIZE
Multicon is always handling lock and protect internally, so there is no need to support lock for the
external device.
A.6 Triton
Please refer to the NCB protocol specification for further details concerning this protocol.
A.7 Thomson/Grass Valley Native
The Thomson/Grass Valley Native protocol is supported on TCP/IP and serial (RS232/RS422).
Sources and destinations in Native protocol, refer to inputs and outputs on a level in Multicon.
Serial port settings (default):
• Port mode: RS232
• Baud rate: 9600
• Parity: None
• Data bits: 8
• Stop bits: 1
TCP/IP settings: