Nevion Multicon - Manual (Page 15)

System Architecture 15
ID: man-multicon Multicon Manual Rev. L
Figure 4.8 shows how to use Multicon VX-MOD together with VikinX Sublime and a Flashlink
system with Multicon GYDA. The Sublime router is connected via TCP/IP using the Modular
Router Protocol, while Multicon for Flashlink (in the Flashlink frame) is connected via TCP/IP
using the MBUS protocol between Multicon controllers.
The two redundant Multicon controllers in the Modular frame have to communicate internally to
exchange state information using the MBUS protocol over the external IP network (for internal use
between controllers only and not visible externally).
Note: Redundant Multicon controllers always have to be reachable over
an external IP network.