Nevion Multicon - Manual (Page 74)

Protocol Specifications 74
ID: man-multicon Multicon Manual Rev. L
Appendix A Protocol Specifications
A.1 Modular Router Protocol (MRP)
MRP is Nevion’s default protocol for IP northbound access (host) from external systems and south-
bound access (client) to control routers and other integrated devices. Please refer to the MRP
protocol specification for further details concerning this protocol.
A.2 NCB Sublime/Compact
This is Nevion’s default protocol for serial northbound access (host) from external systems and
southbound access (client) to control routers and other integrated devices. Please refer to the NCB
protocol specification for further details concerning this protocol.
A.3 SNMP
SNMP is supported for monitoring and control of both Flashlink and VikinX routers. Third-party
routers integrated with the Multicon controller may also be controlled using the SNMP interface.
Please refer to the Multicon SNMP protocol specification for further details concerning this pro-
tocol.
A.4 Snell Pro-bel SW-P-02
The Snell Pro-bel SW-P-02 protocol is supported on TCP/IP and serial port (RS422/RS232).
Serial port settings (default):
• Port mode: RS422
• Baud rate: 38400
• Parity: Even
• Data bits: 8
• Stop bits: 1
TCP/IP settings (default):
• Northbound (host):
− Listens for connections on port 2000
• Southbound (client):
− Connects to client using port 2000
Multicon supports the following commands for northbound interfaces: