Nevion Multicon - Manual (Page 4)

11.2 Upgrade from GYDA-SC, ETH-CON and SYSCON to Multicon 58
11.3 Upgrade Procedure for Multicon 58
11.3.1 Using Nevion Configurator 58
11.3.2 Using Multicon Web Interface 60
12 Hardware Information 61
12.1 Housing 61
12.2 Status LEDs 62
12.3 How to Access the Module 63
12.4 Card Insertion and Removal 64
12.5 Storage 64
12.5.1 CF card (Mk2 only) 64
12.5.2 MicroSD card (Mk4 only) 65
12.6 Battery (Mk2 only) 65
12.7 Reset Button (Mk2 only) 66
12.8 Dip switches (Mk4 only) 66
12.8.1 Factory default procedure 67
12.9 Flashlink Card Hot Swap 67
12.10 Back Plane Connectors 68
12.10.1 Hardware revision 2 68
12.10.2 Hardware revision 4 69
12.11 GPIO 70
12.11.1 Connections (mk2) 70
12.11.2 Connections (mk4) 70
12.12 Monitor Flashlink Power Supplies (mk2) 71
12.13 Serial Connectivity 71
12.13.1 Maximum Cable Length (RS-232) 72
12.14 Ethernet Connectivity 72
12.14.1 Ethernet connections on Mk4 72
12.15 External RS422 Flashlink Connectivity 72
A Protocol Specifications 74
A.1 Modular Router Protocol (MRP) 74
A.2 NCB Sublime/Compact 74
A.3 SNMP 74
A.4 Snell Pro-bel SW-P-02 74
A.5 Leitch Pass-Through 75
A.6 Triton 77
A.7 Thomson/Grass Valley Native 77
B General Environmental Requirements for Nevion Equipment 80
C Product Warranty 81