Nevion Multicon - Manual (Page 18)

Specifications 18
ID: man-multicon Multicon Manual Rev. L
All alarms are sent as SNMP traps with user selectable filtering.
5.2.3 Configuration Protocol
Multicon uses Device Configuration Protocol (Nevion proprietary) over TCP/IP for setup of the
system. The protocol is only used internally between the Nevion Configurator and Multicon.
5.2.4 Spread Communication
This product uses software developed by Spread Concepts LLC for use in the Spread toolkit. For
more information about Spread see
http://www.spread.org .
The Spread interface is used for internal communication between Multicon controllers and pro-
vides a highly reliable communication mechanism.
5.3 Performance
5.3.1 Number of Flashlink Cards
The following number of Flashlink cards are supported per Multicon card:
• 10 Flashlink cards maximum with single-frame license
• 80 Flashlink cards maximum with multi-frame license
5.3.2 Number of VikinX Devices
The following number of VikinX devices (routers and control panels) are supported per Multicon
card:
• Total of 32 devices (routers and control panels) when the Multicon card is NOT used for
Flashlink
• Total of 8 devices (routers and control panels) when the Multicon card is also used for
Flashlink
5.3.3 Number of Web Clients
The following number of web clients are supported per Multicon card:
• Total of 10 web clients when the Multicon card is NOT used for Flashlink
• Total of 5 web clients when the Multicon card is also used for Flashlink