NavCom LAND-PAK Rev.F - Manual (Page 54)

LAND-PAK™ User Guide – Rev. F
4-53
Chapter 4 ................... Function Test Setup
This chapter provides a test setup of the LAND-PAK
before field operation to ensure system functionality.
The function test setup involves the following:
Nautiz X8 configuration
Radio modem configuration
Hardware setup
System inventory and battery charging must be
completed before this test setup. Refer to Chapter 2
Inventory Check and Chapter 3 Battery Charging.
The function test setup does not involve
satellite communication. Refer to the
FieldGenius User Guide for instructions
on initializing the system to start
collecting computed positions.
Nautiz X8 Configuration
This section provides steps to initially configure the
Nautiz X8 handheld controller prior to the installation
of the desired software.
1. Remove handheld unit from packaging and
install battery pack.
2. Press and hold power button on the
keypad for two seconds to allow the unit to
boot up. The Windows Mobile home screen
will appear.