Priority rx/tx, Forward error correction (fec) and error checking, Operating modes – NavCom LAND-PAK Rev.F User Manual
Page 112: Table 13: receiver sensitivity
LAND-PAK™ User Guide – Rev. F
A-113
Priority RX/TX
Set the radio priority is TX.
Forward Error Correction (FEC) and Error Checking
FEC is disabled and unavailable in the SF-3040.
Disable FEC in the 35W radio.
Operating Modes
The radio modem operates in data transfer mode by
default. Programming mode is used to configure the
radio modem.
The sensitivity of the receiver depends
on the channel spacing of the radio
mode (data speed of the radio interface)
and on the mode of the forward error
correction (FEC), which is OFF on the
SF-3040. Refer to Table 14.
Table 14: Receiver Sensitivity
Bandwidth, KHz
FEC OFF
(Default)
25
-110 dBm
12.5
-112 dBm
The signal threshold level setting of the
receiver determines the level above
which the search for the actual data
transfer signal is active.
Do not install the radio modem on a
strongly vibrating surface. Suitable
dampening and /or isolation materials
should be used in cases where the
- SF-3050 Logging Data to Internal Memory SurvCE (4 pages)
- SF-3040 Logging Data to Internal Memory or SD Card (6 pages)
- SF-3050 Logging Data to USB Using SurvCE (4 pages)
- StarFire over IP (5 pages)
- SF-3050 Quick Start (4 pages)
- SF-3050 A Computationally Efficient Ambiguity Resolution (7 pages)
- StarFire (5 pages)
- StarFire to SW v3.0.12.0 (3 pages)
- SF-3050 Rev.I (196 pages)
- StarUtil-3000 Rev.G (177 pages)
- Sapphire Rev.L (450 pages)
- StarUtil-3000 Rev.A (119 pages)
- SF-3050 Rev.A (169 pages)
- SF-3050 Rev.B (201 pages)
- SF-3050 Rev.D (235 pages)
- Rinex Utility Rev.D (17 pages)
- SF-3040 Quick Start (4 pages)
- SF-3040 Rev.F (217 pages)
- SurveCE Integration Rev.A (150 pages)
- Install Utility Rev.C (26 pages)
- LAND-PAK Quick Start Rev.B (7 pages)
- LAND-PAK Rev.E (156 pages)
- StarUtil Rev.C (58 pages)
- LAND-PAK Rev.N (194 pages)
- StarUtil Rev.B (8 pages)
- StarUtil Rev.F (134 pages)
- SF-2040 Rev.E (63 pages)
- RT-3010 Rev.E (61 pages)
- StarFire Satellite Change Rev.G (24 pages)
- StarFire Satellite Change Rev.I (23 pages)
- TS Collecting Receiver (2 pages)
- TS Factory Default (2 pages)
- SF-2040 Rev.C (178 pages)
- SF-2040 Rev.F (93 pages)
- RT-3020 Rev.F (93 pages)
- SF-2110 Quick Start Rev.A (2 pages)
- StarPac Rev.A (15 pages)
- StarControl Rev.C (56 pages)
- SF-2050 Rev.F (99 pages)
- TruBlu Rev.A (2 pages)
- VueStar Rev.B (13 pages)
- SF-2110 Rev.B (99 pages)
- StarUtil-2110 Rev.A (85 pages)
- RT-3010 Rev.F (89 pages)