Handshaking, Additional, Handshaking additional – NavCom LAND-PAK Rev.F User Manual
Page 120: Figure 76: baud rate setting change
LAND-PAK™ User Guide – Rev. F
A-121
Figure 76: Baud Rate Setting Change
6. Press the Set soft key to set the baud rate to
38400 bit/s. The previous submenu returns with
38400 bit/s listed as the current baud rate.
The SF-3040 GNSS receivers RTK
corrections com port will be configured
to the same baud rate.
7. Press the Back soft key once to return to the main
menu.
8.
Continue to the next section.
Handshaking
The Handshaking menu functions remain at the
default settings: CTS: Clear To Send, CD: RSSI, and
RTS: Ignored.
Additional
Error correction and error checking is not used in the
SF-3040 and must be set to OFF.
FEC Signal Thresholds
Channel Spacing: 25 KHz or 12.5KHz (base
and rover must match)
FEC Off: -110 dBm or -112dBm (must match
bandwidth)
The setting for error correction must
be set to OFF on all radio modems
- SF-3050 Logging Data to Internal Memory SurvCE (4 pages)
- SF-3040 Logging Data to Internal Memory or SD Card (6 pages)
- SF-3050 Logging Data to USB Using SurvCE (4 pages)
- StarFire over IP (5 pages)
- SF-3050 Quick Start (4 pages)
- SF-3050 A Computationally Efficient Ambiguity Resolution (7 pages)
- StarFire (5 pages)
- StarFire to SW v3.0.12.0 (3 pages)
- SF-3050 Rev.I (196 pages)
- StarUtil-3000 Rev.G (177 pages)
- Sapphire Rev.L (450 pages)
- StarUtil-3000 Rev.A (119 pages)
- SF-3050 Rev.A (169 pages)
- SF-3050 Rev.B (201 pages)
- SF-3050 Rev.D (235 pages)
- Rinex Utility Rev.D (17 pages)
- SF-3040 Quick Start (4 pages)
- SF-3040 Rev.F (217 pages)
- SurveCE Integration Rev.A (150 pages)
- Install Utility Rev.C (26 pages)
- LAND-PAK Quick Start Rev.B (7 pages)
- LAND-PAK Rev.E (156 pages)
- StarUtil Rev.C (58 pages)
- LAND-PAK Rev.N (194 pages)
- StarUtil Rev.B (8 pages)
- StarUtil Rev.F (134 pages)
- SF-2040 Rev.E (63 pages)
- RT-3010 Rev.E (61 pages)
- StarFire Satellite Change Rev.G (24 pages)
- StarFire Satellite Change Rev.I (23 pages)
- TS Collecting Receiver (2 pages)
- TS Factory Default (2 pages)
- SF-2040 Rev.C (178 pages)
- SF-2040 Rev.F (93 pages)
- RT-3020 Rev.F (93 pages)
- SF-2110 Quick Start Rev.A (2 pages)
- StarPac Rev.A (15 pages)
- StarControl Rev.C (56 pages)
- SF-2050 Rev.F (99 pages)
- TruBlu Rev.A (2 pages)
- VueStar Rev.B (13 pages)
- SF-2110 Rev.B (99 pages)
- StarUtil-2110 Rev.A (85 pages)
- RT-3010 Rev.F (89 pages)