Directed Electronics VIPER 3203 User Manual

Page 34

Turn Paging off: The remote will not wake up to check for mes-

sages with paging off in the setup remote menu.
Note: The remote will not receive trigger messages from the sys-
tem.
Turn Beeps off: The button beeps can be turned off in the setup

remote menu. The command beeps still play normally.

Responder LE Battery Replacement

Battery

Cover

Battery

Clip

Rear View

1. Slide the battery cover up by ap-
plying equal pressure at its top and
bottom (the arrow on the cover indi-
cates the direction), remove the cover
from the remote control housing.

2. Gently pry up on the battery (or
batteries) to remove it from the holder.
Insert a new battery (or batteries) into

the holder and under the clip with the positive (+) side up. Replace the
battery cover. The remote control is now ready for use.

1-way Battery Replacement

Using a small

1.
ﬂathead screwdriver,
insert into slot located
at the bottom of the
keypad and carefully
pry the front of the unit
open.