Alarm features, Normal arm protection, Sensor silent arm protection – Directed Electronics VIPER 3203 User Manual

Page 23

Alarm Features

Normal Arm Protection

Control center LED: The control center LED ﬂashes as a visual indicator
that your vehicle’s security system is active.

Starter Kill: The Failsafe starter kill relay prevents the engine from
starting

Note

May require additional parts and installation

Sensor triggers: The onboard shock sensor can distinguish minor im-
pacts from major impacts to the vehicle exterior. Minor impacts cause
the system to emit a Warn-away output by chirping the siren and
ﬂashing the parking lights for 3 seconds. Major impacts caused for
example by a forcible entry attempt, results in a Full Trigger output. The
siren sounds and the parking lights ﬂash for 30 seconds or longer. Full
Triggers send a message to the remote control.

Point of entry triggers: Opening the hood or trunk causes a Full Trig-
ger output, while opening a Door or turning on the Ignition causes the
the siren to chirp 3 seconds before beginning the Full Trigger output.
This 3 second delay allows time to disarm and silence the siren in
case of accidental trigger. The Full Trigger message is still sent to the
remote.

Sensor Silent Arm protection

Sensor Warn-away and Sensor Full Trigger activations only send mes-
sages to the Responder LE remote control, while the parking light ﬂash
and siren outputs are defeated. Point of entry triggers will activate the
parking light ﬂash, siren, and send messages normally.