Directed Electronics VIPER 3203 - Manual (Page 13)

10 © 2009 Directed Electronics. All rights reserved.
Advanced Commands: (Level 1)
Press and release the button 1 time. The LED illuminates indicat-
ing Level 1
Note: The transmit LED on the 1-way remote will flash in groups of 1
to indicate level 1.
Silent Arm
Press and release
The alarm arms, doors lock (if connected), and the parking lights flash
once. The arm LED turns on to confirm. valet mode* or trigger zone
fault report** messages may be received.
Silent Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the parking lights
flash twice. The disarm LED turns on to confirm. The silent disarm out-
put may be replaced by the alarm report**.
AUX 1
Press and release
AUX
Activates (or if on, deactivates) the aux 1 output. The aux LED and on
tones or off tones play to confirm.
* See Remote and System Operations section for details.
** See Alarm Features for details.