Directed Electronics VIPER 3203 - Manual (Page 15)

12 © 2009 Directed Electronics. All rights reserved.
off accordingly. The disarm LED and valet beeps play (1 for on, 2 for
off) to confirm.
AUX 2
Press and release
AUX
Activates (or if on, deactivates) the aux 2 output. The aux LED and on
tones or off tones play to confirm.
Arm Status
Press and hold the button
The remote will generate an output to display the systems arm status
since its last update message or command operation. It will report
status via ghost LED’s, beeps, and tones as described in this section
for arm, disarm, valet mode arm, valet mode disarm, sensor silent
arm, full silent arm.