Montigo PVHFL58-300 - Manual (Page 16)

Service
Page 16
XG0519 - 070714
PVHFL58-300 & PVHFL510-300 Horizontal Power Vent
Step 6: Using the large bell connector, connect the black fibre wire from the
power cable to the black wire from the motor and the black wire from the
capacitor.
Figure 9f.
Step 7: Using the small bell connector, connect the brown wire from the mo-
tor to the black wire from the capacitor.
Figure 9g.
Step 8: Secure the wiring neatly with the supplied zap straps. Check that the
power vent operates and spins counterclockwise. Note: When replacing from
the inside you will need to reinstall the power vent and check spin from the
outside. Note: Ensure wires are secured away from moving parts
Figure 9h.
Go to reinstalling either from outside or inside.