Montigo L38DF-ST - Manual (Page 24)

L38DF-ST* Indoor Gas Fireplace
Page 24 XG0810 - 150204.2
Installation
Section 9: Installing the Accessories
Optional Cultured Rocks
The L38DF-ST* has the option of installing the cultured rocks which
mimic real stone. These may be spaced at random or in a visual pat-
tern of your preference in the burner pan. See the Montigo web site
for photographs and ideas.
www.montigo.com
Installing Firestones in Natural Gas and Propane Fireplaces
The L38DF-ST* fireplace is supplied with firestones. Remove the
glass door. Follow these instructions to ensure all parts are removed
or replaced as required. Once the glass door is removed place the
firestones randomly across the pan as described in Figure 23 to 23a.
Figure 23. Completed firestone installation. Second Gen burner
shown.
(Note: DO NOT place ANY firestones on top of the burners or pilot).
Figure 23a. Operating gas fireplace with firestones surrounding
burner tray. Second Gen Burner Shown
DO NOT COVER THE BURNERS or PILOT
WARNING
To install the door, hook the top edge of the door frame into place.
Lower the door into position and follow the previous steps shown in
reverse order.
Installing the Door:
Step 8:
Grasp the Door on either side, usually midway and lift upward,
lift the door carefully up and away from the front of the fireplace.
See Figures 22g. Place the Door aside in a safe place while
maintenance and / or cleaning is being performed.
Figure 22g. Removing and installing the glass doors. Both sides
typical.
Removing the Door:
WARNING
When installing the fireplace - gas lines, fittings,
accessories or any other objects cannot impede the
proper movement of the door buckles.