DirecTV DW65X91 - Manual (Page 72)

72
SYSTEM OPTIONS AND PREFERENCES
CHANGING THE SIGNAL SOURCE
The Signal Source menu allows you to choose the source from which you would like the
signal to come: Antenna A, Antenna B, or DIRECTV (SAT) or Video Inputs. The same
can be accomplished using the ANTENNA, TV/SAT, and TV/VIDEO buttons on your
remote control. If you misplace your remote control, use the front panel buttons to access
this menu and change the signal source.
To access the Signal Source menu:
1. Press MENU on the remote control to access the main menu.
2. Select System Options from the main menu.
3. Select Signal Source from the next menu.
RTN Help
Signal Source
Antenna A
Antenna B
SAT
Video inputs
1 Signal Source
2 Signal Type
3 Channel Search
4 Mailbox...
5 Purchases...
6 Time and Date
Select the appropriate signal source.
4. Use the arrows and OK to select which source from which you would like to receive a
signal.
CHANGING THE SIGNAL TYPE
The Signal Type menu lets you choose whether you are receiving a signal from cable TV
or an off-air antenna. When you run Channel Search (see “Channel Search” in this section
for details), the TV automatically detects your signal and you don’t have to specify it here.
However, if you decide to change the source, you will need to use the Signal Type menu.
Note that if your signal source is coming from DIRECTV, this menu will not be available.
RTN Help
Signal Type
Cable
Air
1 Signal Source
2 Signal Type
3 Channel Search
4 Mailbox...
5 Purchases...
6 Time and Date
Select whether you are receiving signals from
an off-air antenna or cable.
The Video Inputs selection is only for
“Video 1” source.
To select other signal sources, use
the TV/VIDEO button on the remote
control.