Dish Network Solo 311 - Manual (Page 54)

Page 49
Using Caller ID
Page 49
4. Select the Change Password option.
5. Enter the current password using the number pad buttons.
As soon as you enter the fourth digit of the password, the receiver
highlights the
OK option.
6. Press the SELECT button.
7. Enter the new password using the number pad buttons.
As soon as you enter the fourth digit of the password, the receiver
highlights the
OK option.
8. Select the OK option to change the password.
9. Enter the new password again, using the NUMBER PAD buttons. The
receiver displays stars (*) as you enter the digits of the password. As
soon as you enter the fourth digit of the password, the receiver
highlights the
OK option. Press the SELECT button.
Memorize the new password. From now on, you must enter this
password to lock or unlock the receiver.
U SING C ALLER ID
Caller ID displays on your TV the names of people as they call you if you
subscribe to Caller ID from your local phone company. To use this feature,
make sure you have a phone line connected to the receiver and that the
Caller ID feature is enabled. After you turn on Caller ID , it stays on until
you decide to turn it off.
Note : For best performance, make sure your system is properly grounded.
C ALLER ID S CREENS
When you receive a call, you will see a Caller ID popup screen.