Dish Network Solo 311 - Manual (Page 45)

Page 40
Chapter 3
Using the System
D ELETING AN E VENT T IMER
1. Press the MENU button.
2. Select the Timers option.
3. The receiver displays the Event Timer Management menu.
4. Select an event timer that you want to delete. A check mark appears in
the box next to the event timer.
5. Move to Delete and press SELECT on the remote.
Do this again for any other timer(s) that you want to delete.
R EVIEWING E VENT T IMERS
You can review event timers by using the Event Timer Management menu.
1. Press the MENU button.
2. Select the Timers option.
3. The receiver displays the Event Timer Management menu.
C REATING VCR E VENT T IMERS
To use VCR Event Timers, you must connect the receiver’s back panel
audio/video outputs to the audio/video inputs on the VCR.