Directed Audio 2 Way Security and Conveniece System VSS-204TW - Manual (Page 18)

NOTE: The LCD transmitter will also have the
zone 2 icon and the alarm icon indicating.
4. The in vehicle LED will illuminate continuously for the duration of shock adjustment
mode.
NOTE: When the shock sensor adjustment mode is
entered, all other timers and operations are bypassed
until shock sensor adjustment mode is exited.
A
DJUSTING THE
S
HOCK
S
ENSOR
S
ETTING
NOTE: When adjusting the shock sensor,
ensure that the vehicle’s doors are closed.
1. Increase Sensitivity—Press and release the button to increase shock sensor sensitivity
by one step. The LCD transmitter beeps 2-times for each step increased in adjustment
(and/or 1 vibrate if programmed). When the shock sensor adjustment reaches
maximum sensitivity when the indicator bar is filled completely to the right .
There are 21 levels of shock sensor adjustment, during sensor adjustment these levels
are displayed on the indicator bar as listed below.
NOTE: When the arm and disarm are programmed
to a single button, then the AUX button is used
to increase the sensitivity setting of the sensor.
Sensor
Adjustment
Level
Bar Number and
Indication
0 no bars displayed
1 bar 1 flashes
2 bar 1 solid
3 bar 1 solid, bar 2 flashes
4 bar 1-2 solid
5 bar 1-2 solid, bar 3 flashes
6 bar 1-3 solid
7 bar 1-3 solid, bar 4 flashes
8 bar 1-4 solid
9 bar 1-4 solid, bar 5 flashes
10 bar 1-5 solid
11 bar 1-5 solid, bar 6 flashes
12 bar 1-6 solid
13 bar 1-6 solid, bar 7 flashes
14 bar 1-7 solid
15 bar 1-7 solid, bar 8 flashes
16 bar 1-8 solid
17 bar 1-8 solid, bar 9 flashes
18 bar 1-9 solid
19 bar 1-9 solid, bar 10 flashes
20 bar 1-10 solid
15
© 2006 Astroflex Electronics - All rights reserved