Auxiliary outputs (options), Shock sensor adjustment, To enter shock sensor adjustment mode – Directed Audio 2 Way Security and Conveniece System VSS-204TW User Manual

Page 17: Shock sensor adjustment t

Auxiliary outputs (options)

This system also supplies outputs that can control convenience options such as remote control

trunk release and window automation. Consult your dealer for available options for your system.

Channel 2 Trunk release: When connected, pressing

for 1.5 seconds will remotely release the

vehicle trunk lid.

Channel 3 auxiliary output: When connected, pressing

and

will immediately activate this

output to control an additional convenience option.

Channel 4 auxiliary output: When connected, pressing

and

will immediately activate this

output to control an additional convenience option.

Channel 5 auxiliary output: When connected, pressing

and

will immediately activate this

output to control an additional convenience option.

Channel 6 auxiliary output: When connected, pressing

and

will immediately activate this

output to control an additional convenience option.

The remote will respond with a page notification consisting of one long beep and for 4-seconds

displays the channel number on the LCD screen. This occurs at the remote after the system has

received the command to activate any of the Auxiliary outputs.

Shock sensor adjustment

O ENTER SHOCK SENSOR ADJUSTMENT MODE

NOTE: The system must be disarmed, doors

and other protected entries (zones 1 and 6) must

be closed, and ignition (zone 5) must be off.

1. Press and hold

and

buttons for 6-seconds.

2. The siren will emit one long chirp and LCD remote will emit 1 long beep when the

buttons on the remote are released (or 1 vibrate, or 1 long beep with vibrate) to

indicate entry into shock adjustment mode.

3. The word “SENSOR” on the LCD transmitter, above the adjustment indicator bar

, will flash for the duration of shock adjustment mode. The sensor bar

indicator will display the current sensor sensitivity setting. Increased sensitivity is

indicated as the bar fills to the right.