Measurement Computing Medallion Getting Started rev.2.1 - Manual (Page 9)

January 2001 Medallion Getting Started
7
S
OFTWARE
I
NSTALLATION
1. Start Windows.
Close all running applications.
2. Insert the Medallion Suite CD into your CD-ROM drive. This is a self starting CD.
... If it does not start on its own, click the Start button,
choose the Run command
type d:\ and then click OK.
* If the CD-ROM is not on D: drive, use the correct drive letter.
3. The following screen will open.
4. Click on the button for the software you purchased.
Note: The Password(s) for your software are on the back of the CD-ROM jewel case.
5. Follow the on-screen directions to install your software.
You are now ready to assemble and connect your Medallion Data Acquisition Module to your
computer/controller. Please see Hardware Assembly.
V
IEW
O
N
-
LINE MANUALS
1. Insert the Medallion Suite CD into your CD-ROM drive. This is a self starting CD. The
following screen will open.
2. Click the Manuals button.
3. The following screen will open.