Measurement Computing Medallion Getting Started rev.2.1 - Manual (Page 12)

10
Medallion Getting Started January 2001
C
ONFIGURING THE
M
EDALLION
F
RONT
-
END
The Medallion front-end is configured by setting rocker switches that are accessed via a cover plate on
the bottom of instrument. The appropriate rocker switch(es) for each channel MUST BE SET for proper
operation.
Refer to the possible switch settings on the label attached to the Medallion above the cover plate.
S
WITCH
C
ONFIGURATIONS
The Medallion contains no relays. Switches control the input configuration. These switches are set
with rocker switches located under the access panel on the bottom of the instrument.
Improper settings COULD DAMAGE your equipment, and WILL PRODUCE erroneous measurements.