Measurement Computing 6224 - Manual (Page 42)

Specifications are subject to change without notice.
6224 User’s Manual Specifications 9-5
Accessories
TR-60U 24VDC @ 0.8A (max) universal power supply
CA-1 120V IEC AC Mains cable (US)
CA-216 220V IEC Mains Cable (EU)
CN-268 RJ50, 12 pin Screw Terminal, 4pk
CN-269 RJ50, 120 ohm Quarter Bridge, 4pk
CN-270 RJ50, 350 ohm Quarter Bridge, 4pk
CA-272-01 RJ50 to RJ50 M/M, 1 meter (3.28ft) Cable, 4pk
CA-74-1 RJ12 Shielded Cable, 6-Conductor, Sync, 0.3m (1ft) 1
190658A-01
Stacking plate kit; includes:
2 stacking plates
8 screws (8-32x0.5in, Phillips Flat, 82 degree)
HA-210-5-BK: Handle kit; Includes:
1 molded black plastic handle
2 screws (1/4-20x7/8in, Phillips Pan Head)
CA-192-7C
Ethernet Crossover Cable, 2.133m (7ft)
2,3
CA-242 Ethernet Patch Cable, 0.457m (1.5ft) 2
CA-242-7 Ethernet Patch Cable, 2.133m (7ft) 2
Cable Notes:
1
Up to nine units can be synchronized. The total combined length of the SYNC cables is not to
exceed 2.438m (8 ft).
2
Ethernet cable length must be <3 m (9.8 ft) in order for the system to be CE Compliant.
3 Ethernet crossover cables should only be used for direct network connections. In particular,
attempting to connect a device to a Hub using a crossover cable may prevent that network link
from functioning. Some modern routers have become an exception by including logic to detect
the crossover cable and allow the network link to function.