Measurement Computing E-1608-OEM - Manual (Page 25)

25
Network
Ethernet connection
Table 16. Ethernet connection specifications
Parameter Specification
Ethernet type
100 Base-TX
10 Base-T
Communication rates 10/100 Mbps, auto-negotiated
Connector RJ-45, 8 position
Cable length 100 meters max
Additional parameters HP Auto-MDIX support
Network interface
Table 17. Factory default specifications
Parameter Specification
Protocols used TCP/IP (IPv4 only), UDP
Network ports used
UDP:54211 (discovery)
UDP:6234 (bootloader only)
TCP:54211 (commands)
TCP:54212 (scan data)
Network IP configuration DHCP + link-local, DHCP, static, link-local
Network name E-1608-xxxxxx, where xxxxxx are the lower 6 digits of the device MAC address
Network name publication
By NBNS (responds to b-node broadcasts, therefore only available on the local
subnet)
Network factory default settings
Table 18. Factory default specifications
Parameter Specification
Factory default IP address 192.168.0.101
Factory default subnet mask 255.255.255.0
Factory default Gateway 192.168.0.1
Factory default DHCP setting DHCP + link-local enabled
Network security
Table 19. Factory default specifications
Parameter Specification
Security implementation
TCP sockets are not opened unless application sends the correct PIN code (stored in
non-volatile memory, may be changed by user, default value 0000)
Number of concurrent sessions 1
Vulnerabilities TCP Sequence Number Approximation Vulnerability