Measurement Computing CIO-PDISO16 - Manual (Page 16)

15
Chapter 4
Specifications
All specifications are subject to change without notice.
Typical for 25°C unless otherwise specified.
Specifications in italic text are guaranteed by design.
Relay specifications
Table 1. Relay specifications
Number of relays 16
Contact configuration 16 form C, SPDT
Contact rating (resistive load) 7A/30VDC or 10A/125V AC
Contact resistance 50 milliohms
Coil resistance 70 ohms
Isolation Between open contacts: 750 VAC, 50/60 Hz, 1 min.
Between coil and contacts: 1500 VAC, 50/60 Hz, 1 min.
Operate time 10 milliseconds max.
Release time 5 milliseconds max.
Vibration 10 to 55 Hz (dual amplitude 1.5 mm)
Shock 10 G (11 milliseconds)
Insulation resistance 100 M ohms min. (500 V @ 1 minute)
Life expectancy Mechanical: 10 ^7 mechanical operations, min.
Electrical: 100,000 min at full load
Isolated inputs
Table 2. Isolated input specifications
Number 16
Type Non-polarized, opto-isolated (Not TTL compatible)
Voltage range DC: 5-28 V
AC: 5-28 V (50-1000 Hz)
Isolation 500 V
Resistance 1.6 K Ohms min.
Response without filter: 20 µS
with filter: 5 mS
Filters Time constant: 5 ms (200 Hz)
Filter control: Each input individually switch selectable
Power-up /reset: Filters off
Power consumption
Table 3. Power consumption specifications
+5 V Power All relays off: 0.2 A typical
All relays on: 1.2 A typical