beautypg.com

Measurement Computing CB-NAP-7000D User Manual

Page 27

background image

NAP7000D User Manual (Version 1.0) ---- 27

Fig 2-19 Control the desired output value of CB-7021 by Excel.

Step 3: Pressing one of these 3 command buttons to decide the output value. .

Step 4:

Entry the module address for the selected module. In this case, please enter

3.

Step 5:

Select the exact baud rate in the Baud Rate Combo for the selected module.

Step 6:

Select the status of checksum(Disable or Enable). Notice, the status of

checksum must be exact to your physical CB-7000 series module device. If you

select Enable, you must to enable checksum status for CB-7000 module. The default

setting for CB-7000 series module is disable.

After above six steps, the setting window shown as Fig 2-21.

See also other documents in the category Measurement Computing Hardware: