Measurement Computing CB-NAP-7000D - Manual (Page 13)

NAP7000D User Manual (Version 1.0) ---- 13
Fig 2-7 The search window of NAP7000D.
Some information is shown to indicate that the searching status. Initially, the search
range for module address is from 0 to FF[hex]. The default COM port is the attached
COM port detected in startup time as fig 2-3 shown. And the baud rate may be choose
among 115200, 57600, 38400, 19200, 9600, 4800, 2400. Please refer to sec 2-4 to
choose the COM Port and baud rate for searching process. During the search
processing, user can quit in any time by click the Stop or Exit button. And the
searching result display in a window that represent the found module. All the
configuration information for every CB-7000 module will be displayed. It is useful to
debug the remote control network. And when establishing the hot-link conversation.