Denon AVR-3802 - Manual (Page 57)

57
Tone control setting
• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
1 Display the surround parameter
screen on the monitor.
The screen for the selected
surround mode appears.
“TONE” cannot be selected
in the Direct mode.
SURR.
PARA.
1 2 3
4 5 6
7 8 9
+10 0 TV/
VCR
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-883
ON /
SOURCE
TUNER
VDP
VCR-1 VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
DISPLAY
RETURN SETUP
MENU
SHIFT
SURR.
PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
4
1, 6
3, 5
2 Select “TONE”.
BAND MODE
TUNING
TUNING
3 Switch to the Tone Control
screen.
ENTER
SHIFT
4
BAND MODE
TUNING
TUNING
5 Enter the setting.
The surround menu screen re-appears.
ENTER
SHIFT
6 To end the setting mode, press the surround parameter button again.
SURR.
PARA.
To select Bass or Treble. To set the level.
BAND MODE
TUNING
TUNING
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
• To operate the tone control from the main unit.
1 The tone switches as follows each time the TONE CONTROL button is pressed.
TONE
CONTROL
2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level.
• To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)
• To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to –12 dB in steps of 2 dB.)
SELECT
(Main unit)
(Main unit)
1 TREBLE 0 BASS