Denon AVR-3802 - Manual (Page 36)

36
5
6
Use the D and H cursor buttons to select the mode for the
button at which the system call signals are to be registered,
then press the ENTER button.
“SELECT KEY” is displayed. Press the button at which the
system call signals are to be registered, then press the
ENTER button.
• “ENTER KEYS” is displayed, then the mode display
appears.
7
8
q Press the mode selector button according to the button
with the remote control signals to be registered.
w Press the buttons with the remote control signals to be
registered one at a time.
Press the ENTER button.
• “COMPLETE” appears on the remote control unit’s display
and registration is completed.
ENTER
SHIFT
(3) Using the system call function
NOTES:
• The remote control signals of the buttons pressed while registering the system call signals are emitted, so be careful not to operate the
components accidentally (cover the remote sensors, for example).
• If you exceed the number of signals that can be registered, “FULL” appears on the remote control unit’s display and only the number of
signals that can be registered are registered (up to 29 operations).
1 Press the button at which the system call signals have been stored.
• The stored signals are transmitted successively.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
Resetting
(1) Resetting the system call buttons
1 2 3
4 5 6
7 8 9
+10 0 TV/ VCR
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-883
ON / SOURCE
TUNER
VDP
VCR-1 VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
SURROUND
INPUT
OUTPUT TEST TONE SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG EXT.IN MODE
CALL 2 BACKLIGHT CALL 1
STEREO
STEREO DOLBY/DTS
SURROUND DSP SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN SETUP
MENU
SHIFT
SURR. PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 5, 6
1
2
3
ON /
SOURCE OFF
ENTER
SHIFT
BAND MODE
TUNING
TUNING
ENTER
SHIFT
Press the power ON/SOURCE button and the OFF button at
the same time.
• “SET UP” appears on the remote control unit’s display.
Press the ENTER button.
Use the D and H cursor buttons to display “RESET” on the
remote control unit, then press the ENTER button.
ENTER
SHIFT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD