Denon AVR-3802 - Manual (Page 56)

56
• Operating the surround mode and surround parameters from the main unit‘s panel.
1 Turn the SELECT knob to select the surround mode.
SELECT
• When turned clockwise
• When turned counterclockwise
2 Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 59.)
SURROUND
PARAMETER
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
B
1 2 1,3
(Main unit)
(Main unit)
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button
then operate the selector.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC, DTS NEO:6 modes and the input signal switches to a digital
signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode
automatically switches to DTS surround.
SURROUND
MODE
(Main unit)
DIRECT STEREO DOLBY PRO LOGIC II DTS NEO:6 5/7CH STEREO
MONO MOVIE ROCK ARENA JAZZ CLUB VIDEO GAME MATRIX
DIRECT STEREO DOLBY PRO LOGIC II DTS NEO:6 5/7CH STEREO
WIDE SCREEN
WIDE SCREEN
MONO MOVIE ROCK ARENA JAZZ CLUB VIDEO GAME MATRIX