Denon AVR-3802 - Manual (Page 47)

47
[3] Remote control unit operations during multi-source playback (selecting the input source)
This operation is possible when Multi mode is selected.
This operation is not possible in the REC OUT mode.
1 Select “MULTI” using the
RECEIVER button.
(Remote control unit)
2 Press the input source
button.
The multi source switches
directly.
[4] Remote control unit operation during multi-source playback (adjusting the volume level)
1 Select “MULTI” using the
RECEIVER button.
2 Use the VOLUME buttons to adjust the
volume level.
NOTE:
MULTI VOLUME functions when
“Variable” is selected for SYSTEM
SETUP MENU “Multi Vol. Level”.
(See page 26.)
VOLUME
+
-
1 2 3
4 5 6
7 8 9
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
TUNER
VDP
VCR-1 VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
DISPLAY
RETURN SETUP
MENU
SHIFT
SURR.
PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
TUNER PHONO CD
DISPLAY
RETURN SETUP
MENU
SHIFT
SURR.
PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1
2
(Remote control unit)
(Remote control unit)
[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
1 Press the REC/MULTI button.
The display switches as follows each
time the button is pressed.
REC /
MULTI
2 With “M-SOURCE SOURCE” displayed,
turn the FUNCTION knob and select the
source you wish to output.
• The “MULTI” indicator and the
indicator of the selected source light.
FUNCTION
3 Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
4 To cancel, turn the function knob and select “SOURCE”.
• When “SOURCE” is selected, the “MULTI” indicator turns
off.
FUNCTION
B
2 2,4
1
VCR -1 -2 / TAPE -1 -2
PHONO CD TUNER DVD / VDP TV / DBS
2
MULTI
M-SOURCE SOURCE
Display
NOTES:
• The signals of the source selected in the MULTI mode are also
output from the VCR-1, VCR-2/V.AUX and CDR/TAPE recording
output terminals.
• Digital signals are not output from the multi source audio output
jacks.
(Main unit)
(Main unit)
(Main unit)
(Remote control unit)
RECEIVER
RECEIVER
3
CD
Example: CD