Denon AVR-3802 - Manual (Page 41)

41
9 OPERATION
Before operating
1 Refer to “CONNECTIONS” (pages 6 to 13) and check that all
connections are correct.
2 Select “AMP” using the RECEIVER button.
(only when operating with the remote control unit)
3 Turn on the power.
Press the POWER switch (button).
RECEIVER
ON / STANDBY
(Main unit) (Remote control unit)
Light
B
3
ON /
SOURCE ON/STANDBY
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
POWER
REMOTE CONTROL UNIT
RC-883
ON /
SOURCE
DISPLAY MENU
2
3
When pressed, the power turns on and the display lights. The sound
is muted for several seconds, after which the unit operates normally.
When pressed again, the power turns off, the standby mode is set
and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state, the
apparatus is still connected on AC line voltage. Please be sure to
unplug the cord when you leave home for, say, a vacation.
(Remote control unit)