Marantz M-CR610 - Manual (Page 89)

89
Appendix Tips Playback Connections Contents
Front panel Rear panel Index Remote
Settings
2 When making Wi-Fi connection
In this menu, Wi-Fi settings and connections can be made using any of
the four connection methods.
Auto Scan / WPS(PIN) / Web Browser Setup / Manual
%
• If a LAN cable is connected, remove it.
• See the Quick Setup Guide for details on how to connect to Wi-Fi using the
Wi-Fi CONNECT button on the rear panel.
n Auto-Scan
This automatically searches for networks.
1 From the list of the networks, select the one you want
to connect to.
When the network you want to connect to is not detected, select
“Rescan”.
2 Make the following settings.
Default Key : Select the default key.
• When connecting to a “WEP” encrypted network, “Default Key”
menu is displayed.
Password : Input the password.
DHCP / Proxy : Make settings for DHCP / Proxy (vpage 88).
Test Connection : Test the connection.
n WPS (PIN code method)
1 From the list of the networks, select the one you want
to connect to.
When the network you want to connect to is not detected, select
“Rescan”.
2 Set this PIN code to the register.
n Web Browser Setup
Use a web browser to set up Wi-Fi.
A Wi-Fi device that can perform web browse operations is required.
1 Select Web Browser Setup.
2 Press ENTER.
3 Select Wi-Fi network called “Marantz M-CR610” from
your Wi-Fi device.
The IP address appears on the unit.
4 See Step 4 of the Web Control function (vpage 68).