Marantz M-CR610 - Manual (Page 52)

52
Appendix Tips Settings Connections Contents
Front panel Rear panel Index Remote
Playback
Auto scanning DAB broadcast stations
1 Press SEARCH during DAB reception.
2 Use ui to select “Start”, then press ENTER.
After “Searching” is displayed, “_ _Stations” is displayed.
This unit searches for receivable DAB stations.
Switching the reception information for
the currently tuned in DAB station
1 Press INFO during DAB reception.
Dynamic Label Segment :
Text data included in the broadcast is scrolled.
Station Name :
The service station name is displayed.
Program Type :
The category of the tuned in station is displayed.
Ensemble Name :
The ensemble name is displayed.
Frequency:
The frequency is displayed.
Signal Quality :
The reception signal sensitivity is displayed (0 to 100).
• If the reception signal sensitivity is 80 or greater, the program can
be received without noise.
Audio Information :
The mode of the currently tuned in station and its bit rate are
displayed.